What to do when your jellies get a new street address

 

advertising blue blur business
Photo by Pixabay on Pexels.com

Relocating?  Need some help figuring out how & when to move the jellyfish?

First, there’s a couple things to keep in mind.

  1. Time is of the essence. As you know, your jellies need a constant current of water, so it’s not good to keep them out of their tank for more than a day. For the same reason, it’s crucial that your tank has access to electricity to keep the pump running, so you can’t leave it in your new place before the utilities are sorted out. This process needs to happen as quickly as possible to ensure the safety of your jellies, so it’s probably a good idea to save the jellyfish tank for the last day of your move.
  2. Your filter media needs to remain submerged and in the dark the entire time. You spent a whole month cycling your tank’s bacteria, but it only takes a couple hours to kill them off again if you let your filter media dry out or expose it to sunlight for too long. Make sure you have something to accommodate your bio balls and carbon filters, for example a large, sealable ziploc bag or watertight tupperware container, and something to keep them shaded, like a drawstring bag or even just a towel to wrap them in.
  3. Once you set the tank up, it’s hard to move. Make sure you already have the location picked out for your tank in the new house so you only have to set it up once. You may want to review this guide to choose the right place for your tank.

And here’s a list of the supplies you’ll need:

  1. Buckets or tubs, one or two big enough to hold the water in your tank, plus another bucket for a few gallons of extra new saltwater
  2. 2-3 gallons of newly mixed/purchased saltwater to add to your system while you’re setting it back up
  3. Large trash bags to line the bucket(s)
  4. Zip ties to cinch the trash bags closed so the water doesn’t spill
  5. Large ziploc bag or tupperware to store your bio filter media
  6. Towels to keep you from ruining your new or old floors
  7. Small cup for transferring jellies in and out of your tank
  8. Level to make sure your tank is level in your new home

Alright, you’ve gathered your supplies, now you’re ready for the breakdown.

man head spin
Photo by Pixabay on Pexels.com

Breakdown

Step 1: Prepare the jellyfish transition container. Line a bucket or plastic tub with a trash bag, and begin to fill the bag with a few gallons of water from your tank.

Step 2: Transfer your jellies out of the tank. Unplug your tank, and gently move the jellies from your tank to your bucket using a small cup.

Step 3: Take the filter media out of the tank. Take the bio balls and carbon filters (and micron pad if you have one) out of your filter box and place them in a large ziploc bag or tupperware container. Fill the container with tank water and seal it for transportation, then wrap it in a towel or put it in a drawstring bag to keep it out of the sunlight.

Step 4: Get the rest of the water out of your tank. Fill the jellyfish bucket the rest of the way up with water, then fill another bag-lined bucket with the remaining water until your tank is empty. Now cinch your bags closed with zip ties, making sure to get ALL the air out of the bags. This way they don’t slosh around or spill in your vehicle, and your jellies won’t be harmed by air bubbles.

Step 5: Dry the inside of your tank. Give the interior a good wipe down with a towel to make sure it won’t get the inside of your vehicle wet. You may want to leave a towel in the display area and a towel in the sump just to soak up any extra water on the drive.

Step 6: Pack it up. Keep the drip tray, soffet, and lid separate from the tank so they don’t rattle around and scratch the acrylic. You may want to wrap the tank in a moving blanket to prevent scratching or other damage.

Now you’re at the new place, so it’s time to set it all back up.

close up photography of white poodle
Photo by Cal David on Pexels.com

Set Up

Step 1: Place your tank in its new spot. Make sure it’s level before you add water, but keep in mind it may shift with the added weight of the water. If it’s not level, wedge a shim underneath it in the right places until it is. Keeping your tank level is essential.

Step 2: Add water and filter media to the tank. Take the water out of your no-jelly bucket and put it back in the tank, then keep filling it as close to the top as you can while keeping at least a couple gallons of water in the jelly bucket. Add your filter media back to the filter box, preferably using a clean mechanical filter to catch any gunk that may come out of your spray bars when you turn the pump on. Now fill the remainder of the tank with the few gallons of new saltwater you brought, keeping an eye on the sump level so as not to cause an overflow.

Step 3: Turn the pump on and wait. Now your tank is ready to be up and running again, so plug the pump back in and let the water cycle through for at least an hour before you add your jellies back. There will probably be some loose gunk from the plumbing or the biological filters floating in the system, which you can simply allow the mechanical filters to catch over time, or remove yourself with a turkey baster.

Step 4: “Burp” the air out of your tubing. As you add water back, air bubbles will start to form in your tubing and in your spray bars, which can harm your jellies if they make their way into the display area of your tank later. Give your tubing a gentle shake to loosen some bubbles, then give it a gentle squeeze to help push the bubbles out. Now move your finger under the top spray bar and push the bubbles out from underneath, and repeat the process until they’re gone.

Step 4: Acclimate your jellies. Even though your tank has mostly the same water as before, the new salt water you added may create a slight change in water temperature and/or chemistry that could potentially harm your jellies if you just dump them straight in. So just to be safe, perform 3-4 small water changes [roughly a cup (8oz)] over the course of half an hour once the water in your tank starts to clear up. Then you can gently add them back to your tank one by one with the cup you used earlier.

Step 5: Welcome your jellies to their new home! Sharing cake and balloons with loved ones is encouraged, but not necessary.

purple and red balloons
Photo by spemone on Pexels.com

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google+ photo

You are commenting using your Google+ account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s